United States/Heaters: Wall Mount Non Recessed/UH Series With Wall and Ceiling Bracket |
|
Spec Sheet (.pdf) |
General Characteristics of UH Series Horizontal Fan Forced Unit Heater. |
Heavy gauge welded steel cabinet with powder coated finish and control compartment
with a hinged and latched access door, simplifying wiring installation and Maintenance
Circular copper clad steel sheath element with continuously brazed steel fins formed to
match the air delivery pattern of the fan Blade
All units come equipped with automatic resetting type limit controls to de-energize the
heater should an over-temperature situation occur
Totally enclosed, single phase, permanently lubricated, thermally protected motors with unit bearings on 3 KW - 10 KW models and sleeve bearings on 12.5 KW - 48 KW models - mounted with rubber insulators to minimize vibration and noise. Fan assembly enclosed by a heavy gauge, close spaced, chrome plated wire guard
Louvers are individually adjustable for directional control of air flow and the entire assembly can be repositioned in the field from down flow to up flow or left / right directional air flow
20 KW through 48 KW units and all 480V have built in 24 Volt transformer for low voltaje remote thermostat application. 25 KW through 48 KW models available in 2-stage on special order (consult factory)
Unit Heaters can be mounted with the motor shaft from horizontal to downward at 45°
off horizontal. Pre-drilled holes and installed threaded nuts provided to allow hanging by
threaded rods - 1/4” for units up to 15 KW and 5/16” for 20 KW units and larger.
Optional wall / ceiling mounting brackets are available for all units
Wall / Ceiling Bracket |
Product Applications of UH Series Horizontal Fan Forced Unit Heater. |
Recommended for all industrial, commercial, and residential.
For indoor and outdoor use.
|
Warranties of UH Series Horizontal Fan Forced Unit Heater. |
Manufacturer's Limited Warranty: 1 Year. |
Keywords and Search Terms |
Wall Mounted Heater, Ceiling Mounted Heater, Industrial Wall Heater, Bracket Heater, Ceiling Bracket Heater, Wall Bracket Heater, Heater Serie UH, Stand Heater Serie UH, Horizontal Fan, Horizontal Fan with Bracket, Fan with Wall Bracket, Ceiling Mounted Fan, UH Series Fans, Industrial Wall Fans, Industrial Fans With Support, Fans with Industrial Support, Wall Heaters, Wall Heaters with Bracket, Bracket Heaters for Homes, Supported Cellar Heaters, Supported Heaters for Businesses, Supported Basement Heaters, Warehouse Support Heaters, Heaters with Strong Supports, Heaters with Quality Supports, Industrial Heaters, Stand Heaters, Cellar Fan with Support, Warehouse Fan with Stand, Fan for Houses with Stand |
PRIVACY POLICY
Your privacy is important to us. To better protect your privacy, we provide this notice explaining our
online information practices and the choices you can make about the way your information is
collected and used. This notice applies to all information collected or submitted on the
www.VentDepot.com website.
• The only personal information we collect is name, street and email address, telephone number, credit card
information.
• We use the personal information collected from you process orders. Such personal information as we
collect is not used for any other purpose and is not shared.
• We never use or share the personally identifiable information provided to us online in ways unrelated to the
ones described above.
• To prevent unauthorized access, maintain data accuracy, and ensure the correct use of information, we
have put into place appropriate physical, electronic, and managerial procedures to safeguard and secure
the information we collect online.
• Protecting the privacy of the very young is especially important. For that reason, we never collect or
maintain information at our website from those we actually know are under the age of 13, and no part of
our website is structured to attract anyone under 13 to provide information to us.
• You can correct factual errors in your personally identifiable information by sending us a request detailing
the error(s). To protect your privacy and security, we will also take reasonable steps to verify your identity
before granting access or making corrections.
• In the unlikely event any of the personal information you supply us online is misused, you may redress
these issues by contacting us directly at sales@ventdepot.com or calling 1-888-514-1516.
Should you have questions or concerns about this Privacy Policy, please call us 1-888-514-1516 or
send us an email at sales@ventdepot.com.
RETURN POLICY
VentDepot, Inc. and VentDepot.com’s products on sale are of industrial and commercial nature, thus
they are built to order. For All Built to Order products there is absolutely no returns or cancellations.
These built to order products if tried to be returned will be subject to a 100% sale price stocking fee.
It is important for our clients to know VentDepot, Inc. ships directly from factory warehouses and
factories to the client by drop shipping. VentDepot, Inc. does not stock products in a warehouse of
their own. If a client decides to cancel or return and order that can be accepted back by the factory
then, they will have to pay 30% of the sale price of the product(s)’s value for restocking the product(s)
with the original manufacturer; plus pay for all shipping charges both of return and of original
purchase, and any other fees the factory may include for handling and is not limited to all of the above fees.
These terms are non-negotiable.
Shipping Policy terms and agreements.
Please read the following information on how to receive Freight shipments when they arrive at your home.
Dear VentDepot Client.
This letter is to inform you how to receive properly your products shipped by a Freight Company usually on pallets called
LTL Freight shipment.
The following video is a you tube video that will explain how LTL shipping works, and how to avoid losses on damaged
merchandise. Please also read the rest of this letter.
https://www.youtube.com/watch?v=VrRKbLXIGi0
The main purpose is for you to receive your products in New and Perfect condition within a Shipping Industry that due to
over handling of heavy items may damage your product before you receive it.
To properly receive and allow claim protection for you and us, and the origin factory. You the client must inspect all items
being received by opening all boxes and packages that may have a hidden dent or damage. The truck driver may try to
pressure you into signing and accepting the merchandise as is, however by law they are required to wait for the client to
inspect his or her products completely. So please do not let a driver pressure you into signing fast.
Once you inspect all items, you may write refuse on the paperwork to return at time of delivery any component that may
seem damaged or unusable due to shipping wreckage. This refusal will allow us to replace or handle a claim to repair or
return you a new product depending on the claim procedure.
It is your final responsibility to inspect all products in a LTL, Less than Truckload, Shipment.
We will not be responsible for paying for any damaged goods and freight for products you did not inspect properly at time
of delivery.
Thank you for protecting your investment and helping us deliver properly your new products.
Sincerely,
VentDepot, Inc.
Claim disclosure letter. By receiving this letter via email you are liable for receiving your order at time of delivery, if not
following these instructions.
Signed,
VentDepot Management Team
PRIVACY POLICY
Your privacy is important to us. To better protect your privacy, we provide this notice explaining our
online information practices and the choices you can make about the way your information is
collected and used. This notice applies to all information collected or submitted on the
www.VentDepot.com website.
• The only personal information we collect is name, street and email address, telephone number, credit card
information.
• We use the personal information collected from you process orders. Such personal information as we
collect is not used for any other purpose and is not shared.
• We never use or share the personally identifiable information provided to us online in ways unrelated to the
ones described above.
• To prevent unauthorized access, maintain data accuracy, and ensure the correct use of information, we
have put into place appropriate physical, electronic, and managerial procedures to safeguard and secure
the information we collect online.
• Protecting the privacy of the very young is especially important. For that reason, we never collect or
maintain information at our website from those we actually know are under the age of 13, and no part of
our website is structured to attract anyone under 13 to provide information to us.
• You can correct factual errors in your personally identifiable information by sending us a request detailing
the error(s). To protect your privacy and security, we will also take reasonable steps to verify your identity
before granting access or making corrections.
• In the unlikely event any of the personal information you supply us online is misused, you may redress
these issues by contacting us directly at sales@ventdepot.com or calling 1-888-514-1516.
Should you have questions or concerns about this Privacy Policy, please call us 1-888-514-1516 or
send us an email at sales@ventdepot.com.
RETURN POLICY
VentDepot, Inc. and VentDepot.com’s products on sale are of industrial and commercial nature, thus
they are built to order. For All Built to Order products there is absolutely no returns or cancellations.
These built to order products if tried to be returned will be subject to a 100% sale price stocking fee.
It is important for our clients to know VentDepot, Inc. ships directly from factory warehouses and
factories to the client by drop shipping. VentDepot, Inc. does not stock products in a warehouse of
their own. If a client decides to cancel or return and order that can be accepted back by the factory
then, they will have to pay 30% of the sale price of the product(s)’s value for restocking the product(s)
with the original manufacturer; plus pay for all shipping charges both of return and of original
purchase, and any other fees the factory may include for handling and is not limited to all of the above fees.
These terms are non-negotiable.
Shipping Policy terms and agreements.
Please read the following information on how to receive Freight shipments when they arrive at your home.
Dear VentDepot Client.
This letter is to inform you how to receive properly your products shipped by a Freight Company usually on pallets called
LTL Freight shipment.
The following video is a you tube video that will explain how LTL shipping works, and how to avoid losses on damaged
merchandise. Please also read the rest of this letter.
https://www.youtube.com/watch?v=VrRKbLXIGi0
The main purpose is for you to receive your products in New and Perfect condition within a Shipping Industry that due to
over handling of heavy items may damage your product before you receive it.
To properly receive and allow claim protection for you and us, and the origin factory. You the client must inspect all items
being received by opening all boxes and packages that may have a hidden dent or damage. The truck driver may try to
pressure you into signing and accepting the merchandise as is, however by law they are required to wait for the client to
inspect his or her products completely. So please do not let a driver pressure you into signing fast.
Once you inspect all items, you may write refuse on the paperwork to return at time of delivery any component that may
seem damaged or unusable due to shipping wreckage. This refusal will allow us to replace or handle a claim to repair or
return you a new product depending on the claim procedure.
It is your final responsibility to inspect all products in a LTL, Less than Truckload, Shipment.
We will not be responsible for paying for any damaged goods and freight for products you did not inspect properly at time
of delivery.
Thank you for protecting your investment and helping us deliver properly your new products.
Sincerely,
VentDepot, Inc.
Claim disclosure letter. By receiving this letter via email you are liable for receiving your order at time of delivery, if not
following these instructions.
Signed,
VentDepot Management Team