$6,348.74 USD
$4,317.14 USD

FREE
SHIPPINGgg

100% MONEY
BACK GUARANTEE

ONLINE
SUPPORTg 24/7 this is on product page

Industrial Heaters
VentDepot
United States/Industrial Heaters/5500 Series Washdown Fan Forced Unit Heater with bracket H5520/HMK, and Thermostat
Spec Sheet (.pdf) Spec Sheet (.pdf)
General Characteristics 5500 Series Washdown Fan Forced Unit Heater with bracket H5520/HMK, H5550/HM
Heavy-duty 304 16 gauge stainless steel shroud.
316 stainless construction available.
Nema 4x non-metallic control panel.
24-Volt control.
3-position switch (off-heat-fan).
Capillary thermostat with stainless steel sensor.
Automatic reset thermal cutout.
Totally enclosed U.L. listed motor.
Pilot light (power on indicator).
Stainless steel finned tubular element. Constructed of 304 or 316 stainless rod and fins.
Control panel on bottom of unit for ease of installation and service
Disconnect switch with enclosure door interlock.
Front grill rotates to direct airflow.
Single-point power connection.
Fan Blade Aluminum.
Epoxy painted cold roll steel model available, consult factory.
Meets all U.L., NEC, and OSHA requirements (when installed as directed).
Corrosion-resistant in high humidity and water-saturated areas (for areas where corrosion resistance is needed in non-explosive areas, contact factory for heater applications and optional materials).
Mounting Bracket Kits and Thermostat.
Made in U.S.A.
Warranties 5500 Series Washdown Fan Forced Unit Heater with bracket H5520/HMK, H5550/HMK and Thermos
Manufacturer's Limited Warranty: 1 Year.
Product Applications 5500 Series Washdown Fan Forced Unit Heater with bracket H5520/HMK, H5550/HMK a
Recommended for all industrial and commercial.
Used in dirty or dusty industrial areas in non-hazardous locations. Also used in areas that may be high in humidity or water saturated.
For indoor and outdoor use.
Keywords and Search Terms
Washdown Fan Forced Unit Heater, Forced washing fan heater with ther, Washing fan heater with thermostat, Washing Fan Heater with Bracket, Washing water heater for kitchens, Washing heater for industrial use, Washing heater for dusty areas, Washing heater for dirty areas, Washing water heater for indoor use, Washdown Industrial with Thermostat, Washdown Industrial with Bracket, TPI wash heater with holder, TPI wash heater with Thermostat, Forced Fan Heater Unit with Bracket, Forced Fan Heater Unit with Thermos, Washing unit of the heater with Bra, Heater of the washing unit, Heater Washing Fan Forced, Forced Washing Fan Heater, Washing heater for benches with Bra, Washing water heater for shops, Washing heater for tents with stand, Washing heater for tents with Therm, Washing heater for shopping centers, Washing Heater for Work Shops, Aviation wash heater with holder, Aviation wash heater with Thermosta, Automotive use of washing heater, Forced heater with thermostat, Forced heater with support

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question
PRIVACY POLICY
Your privacy is important to us. To better protect your privacy, we provide this notice explaining our online information practices and the choices you can make about the way your information is collected and used. This notice applies to all information collected or submitted on the www.VentDepot.com website.
• The only personal information we collect is name, street and email address, telephone number, credit card information.
• We use the personal information collected from you process orders. Such personal information as we collect is not used for any other purpose and is not shared.
• We never use or share the personally identifiable information provided to us online in ways unrelated to the ones described above.
• To prevent unauthorized access, maintain data accuracy, and ensure the correct use of information, we have put into place appropriate physical, electronic, and managerial procedures to safeguard and secure the information we collect online.
• Protecting the privacy of the very young is especially important. For that reason, we never collect or maintain information at our website from those we actually know are under the age of 13, and no part of our website is structured to attract anyone under 13 to provide information to us.
• You can correct factual errors in your personally identifiable information by sending us a request detailing the error(s). To protect your privacy and security, we will also take reasonable steps to verify your identity before granting access or making corrections.
• In the unlikely event any of the personal information you supply us online is misused, you may redress these issues by contacting us directly at sales@ventdepot.com or calling 1-888-514-1516.
Should you have questions or concerns about this Privacy Policy, please call us 1-888-514-1516 or send us an email at sales@ventdepot.com.
RETURN POLICY
VentDepot, Inc. and VentDepot.com’s products on sale are of industrial and commercial nature, thus they are built to order. For All Built to Order products there is absolutely no returns or cancellations. These built to order products if tried to be returned will be subject to a 100% sale price stocking fee. It is important for our clients to know VentDepot, Inc. ships directly from factory warehouses and factories to the client by drop shipping. VentDepot, Inc. does not stock products in a warehouse of their own. If a client decides to cancel or return and order that can be accepted back by the factory then, they will have to pay 30% of the sale price of the product(s)’s value for restocking the product(s) with the original manufacturer; plus pay for all shipping charges both of return and of original purchase, and any other fees the factory may include for handling and is not limited to all of the above fees. These terms are non-negotiable.
Shipping Policy terms and agreements.
Please read the following information on how to receive Freight shipments when they arrive at your home.
Dear VentDepot Client. This letter is to inform you how to receive properly your products shipped by a Freight Company usually on pallets called LTL Freight shipment.
The following video is a you tube video that will explain how LTL shipping works, and how to avoid losses on damaged merchandise. Please also read the rest of this letter.
https://www.youtube.com/watch?v=VrRKbLXIGi0
The main purpose is for you to receive your products in New and Perfect condition within a Shipping Industry that due to over handling of heavy items may damage your product before you receive it.
To properly receive and allow claim protection for you and us, and the origin factory. You the client must inspect all items being received by opening all boxes and packages that may have a hidden dent or damage. The truck driver may try to pressure you into signing and accepting the merchandise as is, however by law they are required to wait for the client to inspect his or her products completely. So please do not let a driver pressure you into signing fast.
Once you inspect all items, you may write refuse on the paperwork to return at time of delivery any component that may seem damaged or unusable due to shipping wreckage. This refusal will allow us to replace or handle a claim to repair or return you a new product depending on the claim procedure.
It is your final responsibility to inspect all products in a LTL, Less than Truckload, Shipment. We will not be responsible for paying for any damaged goods and freight for products you did not inspect properly at time of delivery.
Thank you for protecting your investment and helping us deliver properly your new products.
Sincerely, VentDepot, Inc.
Claim disclosure letter. By receiving this letter via email you are liable for receiving your order at time of delivery, if not following these instructions.

Signed,
VentDepot Management Team

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question
PRIVACY POLICY
Your privacy is important to us. To better protect your privacy, we provide this notice explaining our online information practices and the choices you can make about the way your information is collected and used. This notice applies to all information collected or submitted on the www.VentDepot.com website.
• The only personal information we collect is name, street and email address, telephone number, credit card information.
• We use the personal information collected from you process orders. Such personal information as we collect is not used for any other purpose and is not shared.
• We never use or share the personally identifiable information provided to us online in ways unrelated to the ones described above.
• To prevent unauthorized access, maintain data accuracy, and ensure the correct use of information, we have put into place appropriate physical, electronic, and managerial procedures to safeguard and secure the information we collect online.
• Protecting the privacy of the very young is especially important. For that reason, we never collect or maintain information at our website from those we actually know are under the age of 13, and no part of our website is structured to attract anyone under 13 to provide information to us.
• You can correct factual errors in your personally identifiable information by sending us a request detailing the error(s). To protect your privacy and security, we will also take reasonable steps to verify your identity before granting access or making corrections.
• In the unlikely event any of the personal information you supply us online is misused, you may redress these issues by contacting us directly at sales@ventdepot.com or calling 1-888-514-1516.
Should you have questions or concerns about this Privacy Policy, please call us 1-888-514-1516 or send us an email at sales@ventdepot.com.
RETURN POLICY
VentDepot, Inc. and VentDepot.com’s products on sale are of industrial and commercial nature, thus they are built to order. For All Built to Order products there is absolutely no returns or cancellations. These built to order products if tried to be returned will be subject to a 100% sale price stocking fee. It is important for our clients to know VentDepot, Inc. ships directly from factory warehouses and factories to the client by drop shipping. VentDepot, Inc. does not stock products in a warehouse of their own. If a client decides to cancel or return and order that can be accepted back by the factory then, they will have to pay 30% of the sale price of the product(s)’s value for restocking the product(s) with the original manufacturer; plus pay for all shipping charges both of return and of original purchase, and any other fees the factory may include for handling and is not limited to all of the above fees. These terms are non-negotiable.
Shipping Policy terms and agreements.
Please read the following information on how to receive Freight shipments when they arrive at your home.
Dear VentDepot Client. This letter is to inform you how to receive properly your products shipped by a Freight Company usually on pallets called LTL Freight shipment.
The following video is a you tube video that will explain how LTL shipping works, and how to avoid losses on damaged merchandise. Please also read the rest of this letter.
https://www.youtube.com/watch?v=VrRKbLXIGi0
The main purpose is for you to receive your products in New and Perfect condition within a Shipping Industry that due to over handling of heavy items may damage your product before you receive it.
To properly receive and allow claim protection for you and us, and the origin factory. You the client must inspect all items being received by opening all boxes and packages that may have a hidden dent or damage. The truck driver may try to pressure you into signing and accepting the merchandise as is, however by law they are required to wait for the client to inspect his or her products completely. So please do not let a driver pressure you into signing fast.
Once you inspect all items, you may write refuse on the paperwork to return at time of delivery any component that may seem damaged or unusable due to shipping wreckage. This refusal will allow us to replace or handle a claim to repair or return you a new product depending on the claim procedure.
It is your final responsibility to inspect all products in a LTL, Less than Truckload, Shipment. We will not be responsible for paying for any damaged goods and freight for products you did not inspect properly at time of delivery.
Thank you for protecting your investment and helping us deliver properly your new products.
Sincerely, VentDepot, Inc.
Claim disclosure letter. By receiving this letter via email you are liable for receiving your order at time of delivery, if not following these instructions.

Signed,
VentDepot Management Team

5500 Series Washdown Fan Forced Unit Heater with bracket H5520/HMK, and Thermostat , Washdown Fan Forced Unit Heater, USWTT-001-040

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page