You have no items in your shopping cart.
| United States/Heaters: Wall mount fully recessed, semi-recessed or surface mounted/6300 Series Multiple Angle Cabinet Unit Heater and Accessories Recessing Trim Frames | |||
 |
Spec Sheet (.pdf) | ||
| General Characteristics 6300 Series Multiple Angle Cabinet Unit Heater and Accessories Recessing Tri | |||
| The electric cabinet unit heater is designed for mounting in any position, fully recessed, semi-recessed or surface mounted. All capacities, voltages, physical sizes, grille arrangements and options shall be as specified on the plans. All units must be field convertible to the following: For control by a field supplied remote thermostat. Load management control with an external dryswitch. When closed unit operates under control of either the internal or the external thermostat. When open, unit turns off. Any grille arrangement. The cabinet shall be constructed of heavy duty 16 gauge Zinc coated steel. The heater shall have a removable front door for easy access to the control panel, elements, motor-blower assembly, filters and all internal components. The grill configuration must be easily field convertible to any air flow configuration (by removal of no more than four fasteners). The cabinet shall have a textured finish of two coats of powder coat epoxy and be suitable for use with optional kick space base. Made in U.S.A. The heating elements shall be warranted for 1 year and shall be non-glowing design consisting of special high temperature esistance wire enclosed in an incoloy sheath to which steel fins are furnace brazed. The heating elements shall be located directly in front of the blower discharge air for uniform heating. They shall be mounted with a single anchor at one end to minimize effects of thermal expansion and contraction. Thermal safety limits shall be built into the system to automatically shut off heater in event of overheating due to any cause. The safety cutouts shall be of two types: The primary limit shall be an automatic capillary type to sense the heat along the full length of the heating elements. It shall de-energize the heaters by opening the coil circuit on the heating contactors. The secondary limit shall be a manual reset thermal device to interrupt power to the heating elements. The motors and blowers shall be direct drive and resiliently mounted on rigid heavy gauge frame for quiet operation and long life. The motor shall be two-speed, shaded pole type, rated for the voltage (480 to 600 Volts are single speed only). Each shall have built-in automatic reset overload protection and are life time ubricated. The motor shall be vented and mounted in the air stream to provide maximum cooling of the motor. All units will be supplied as standard with a switch for selecting full heat at high fan speed or reduced heat at low fan speed (On 480 & 600 Volt units the switch changes the heat but not the fan speed). Circuit breakers shall be provided for branch circuit protection where required by NEC. Circuit breakers are optional on all other heaters. Integral factory installed thermostat shall be tamper resistant, linear capillary type. Optional setback thermostat available. | |||
| Product Applications 6300 Series Multiple Angle Cabinet Unit Heater and Accessories Recessing Trim F | |||
| Recommended for all industrial, commercial, and residential. For indoor and outdoor use. | |||
| Warranties 6300 Series Multiple Angle Cabinet Unit Heater and Accessories Recessing Trim Frames | |||
| Manufacturer's Limited Warranty: 1 Year. | |||
| Keywords and Search Terms | |||
| Heater and Accessories Recessing T, Cabinet Unit Heater and Accessorie, NEW heater, Practical heater, industrial heaters, Fan Mounted in different positions, Heater Mounted in different positio, 6300 series mounted, 6300 series heater, Heater of the 6300 series, Semi-recessed heater, Fully recessed heater, Surface Mounted Water Heater, Heater for mounting in any position, The electric cabinet unit heater, 6300 Series Multiple Angle Cabinet, Electric heater, 6300 Series, 6300 series electric heater, Fan Unit Heater Mounted Fan, Mounted Heater 6300 Series, 6300 Series Mounted Fan Series, 6300 series fan mounted in any posi, Mounted Fan Heater, 6300 series cabinet unit heater, Fan of the 6300 series, 6300 Series Fan Heater Fan, 6300 series heater fan mounted, 6300 series mounted fan, Fan mounted | |||
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
PRIVACY POLICY
Your privacy is important to us. To better protect your privacy, we provide this notice explaining our online information practices and the choices you can make about the way your information is collected and used. This notice applies to all information collected or submitted on the www.VentDepot.com website.
• The only personal information we collect is name, street and email address, telephone number, credit card information.
• We use the personal information collected from you process orders. Such personal information as we collect is not used for any other purpose and is not shared.
• We never use or share the personally identifiable information provided to us online in ways unrelated to the ones described above.
• To prevent unauthorized access, maintain data accuracy, and ensure the correct use of information, we have put into place appropriate physical, electronic, and managerial procedures to safeguard and secure the information we collect online.
• Protecting the privacy of the very young is especially important. For that reason, we never collect or maintain information at our website from those we actually know are under the age of 13, and no part of our website is structured to attract anyone under 13 to provide information to us.
• You can correct factual errors in your personally identifiable information by sending us a request detailing the error(s). To protect your privacy and security, we will also take reasonable steps to verify your identity before granting access or making corrections.
• In the unlikely event any of the personal information you supply us online is misused, you may redress these issues by contacting us directly at sales@ventdepot.com or calling 1-888-514-1516.
Should you have questions or concerns about this Privacy Policy, please call us 1-888-514-1516 or send us an email at sales@ventdepot.com.
RETURN POLICY
VentDepot, Inc. and VentDepot.com’s products on sale are of industrial and commercial nature, thus they are built to order. For All Built to Order products there is absolutely no returns or cancellations. These built to order products if tried to be returned will be subject to a 100% sale price stocking fee. It is important for our clients to know VentDepot, Inc. ships directly from factory warehouses and factories to the client by drop shipping. VentDepot, Inc. does not stock products in a warehouse of their own. If a client decides to cancel or return and order that can be accepted back by the factory then, they will have to pay 30% of the sale price of the product(s)’s value for restocking the product(s) with the original manufacturer; plus pay for all shipping charges both of return and of original purchase, and any other fees the factory may include for handling and is not limited to all of the above fees. These terms are non-negotiable.
Shipping Policy terms and agreements.
Please read the following information on how to receive Freight shipments when they arrive at your home.
Dear VentDepot Client. This letter is to inform you how to receive properly your products shipped by a Freight Company usually on pallets called LTL Freight shipment.
The following video is a you tube video that will explain how LTL shipping works, and how to avoid losses on damaged merchandise. Please also read the rest of this letter.
https://www.youtube.com/watch?v=VrRKbLXIGi0
The main purpose is for you to receive your products in New and Perfect condition within a Shipping Industry that due to over handling of heavy items may damage your product before you receive it.
To properly receive and allow claim protection for you and us, and the origin factory. You the client must inspect all items being received by opening all boxes and packages that may have a hidden dent or damage. The truck driver may try to pressure you into signing and accepting the merchandise as is, however by law they are required to wait for the client to inspect his or her products completely. So please do not let a driver pressure you into signing fast.
Once you inspect all items, you may write refuse on the paperwork to return at time of delivery any component that may seem damaged or unusable due to shipping wreckage. This refusal will allow us to replace or handle a claim to repair or return you a new product depending on the claim procedure.
It is your final responsibility to inspect all products in a LTL, Less than Truckload, Shipment. We will not be responsible for paying for any damaged goods and freight for products you did not inspect properly at time of delivery.
Thank you for protecting your investment and helping us deliver properly your new products.
Sincerely, VentDepot, Inc.
Claim disclosure letter. By receiving this letter via email you are liable for receiving your order at time of delivery, if not following these instructions.
Signed,
VentDepot Management Team
Your privacy is important to us. To better protect your privacy, we provide this notice explaining our online information practices and the choices you can make about the way your information is collected and used. This notice applies to all information collected or submitted on the www.VentDepot.com website.
• The only personal information we collect is name, street and email address, telephone number, credit card information.
• We use the personal information collected from you process orders. Such personal information as we collect is not used for any other purpose and is not shared.
• We never use or share the personally identifiable information provided to us online in ways unrelated to the ones described above.
• To prevent unauthorized access, maintain data accuracy, and ensure the correct use of information, we have put into place appropriate physical, electronic, and managerial procedures to safeguard and secure the information we collect online.
• Protecting the privacy of the very young is especially important. For that reason, we never collect or maintain information at our website from those we actually know are under the age of 13, and no part of our website is structured to attract anyone under 13 to provide information to us.
• You can correct factual errors in your personally identifiable information by sending us a request detailing the error(s). To protect your privacy and security, we will also take reasonable steps to verify your identity before granting access or making corrections.
• In the unlikely event any of the personal information you supply us online is misused, you may redress these issues by contacting us directly at sales@ventdepot.com or calling 1-888-514-1516.
Should you have questions or concerns about this Privacy Policy, please call us 1-888-514-1516 or send us an email at sales@ventdepot.com.
RETURN POLICY
VentDepot, Inc. and VentDepot.com’s products on sale are of industrial and commercial nature, thus they are built to order. For All Built to Order products there is absolutely no returns or cancellations. These built to order products if tried to be returned will be subject to a 100% sale price stocking fee. It is important for our clients to know VentDepot, Inc. ships directly from factory warehouses and factories to the client by drop shipping. VentDepot, Inc. does not stock products in a warehouse of their own. If a client decides to cancel or return and order that can be accepted back by the factory then, they will have to pay 30% of the sale price of the product(s)’s value for restocking the product(s) with the original manufacturer; plus pay for all shipping charges both of return and of original purchase, and any other fees the factory may include for handling and is not limited to all of the above fees. These terms are non-negotiable.
Shipping Policy terms and agreements.
Please read the following information on how to receive Freight shipments when they arrive at your home.
Dear VentDepot Client. This letter is to inform you how to receive properly your products shipped by a Freight Company usually on pallets called LTL Freight shipment.
The following video is a you tube video that will explain how LTL shipping works, and how to avoid losses on damaged merchandise. Please also read the rest of this letter.
https://www.youtube.com/watch?v=VrRKbLXIGi0
The main purpose is for you to receive your products in New and Perfect condition within a Shipping Industry that due to over handling of heavy items may damage your product before you receive it.
To properly receive and allow claim protection for you and us, and the origin factory. You the client must inspect all items being received by opening all boxes and packages that may have a hidden dent or damage. The truck driver may try to pressure you into signing and accepting the merchandise as is, however by law they are required to wait for the client to inspect his or her products completely. So please do not let a driver pressure you into signing fast.
Once you inspect all items, you may write refuse on the paperwork to return at time of delivery any component that may seem damaged or unusable due to shipping wreckage. This refusal will allow us to replace or handle a claim to repair or return you a new product depending on the claim procedure.
It is your final responsibility to inspect all products in a LTL, Less than Truckload, Shipment. We will not be responsible for paying for any damaged goods and freight for products you did not inspect properly at time of delivery.
Thank you for protecting your investment and helping us deliver properly your new products.
Sincerely, VentDepot, Inc.
Claim disclosure letter. By receiving this letter via email you are liable for receiving your order at time of delivery, if not following these instructions.
Signed,
VentDepot Management Team
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
PRIVACY POLICY
Your privacy is important to us. To better protect your privacy, we provide this notice explaining our online information practices and the choices you can make about the way your information is collected and used. This notice applies to all information collected or submitted on the www.VentDepot.com website.
• The only personal information we collect is name, street and email address, telephone number, credit card information.
• We use the personal information collected from you process orders. Such personal information as we collect is not used for any other purpose and is not shared.
• We never use or share the personally identifiable information provided to us online in ways unrelated to the ones described above.
• To prevent unauthorized access, maintain data accuracy, and ensure the correct use of information, we have put into place appropriate physical, electronic, and managerial procedures to safeguard and secure the information we collect online.
• Protecting the privacy of the very young is especially important. For that reason, we never collect or maintain information at our website from those we actually know are under the age of 13, and no part of our website is structured to attract anyone under 13 to provide information to us.
• You can correct factual errors in your personally identifiable information by sending us a request detailing the error(s). To protect your privacy and security, we will also take reasonable steps to verify your identity before granting access or making corrections.
• In the unlikely event any of the personal information you supply us online is misused, you may redress these issues by contacting us directly at sales@ventdepot.com or calling 1-888-514-1516.
Should you have questions or concerns about this Privacy Policy, please call us 1-888-514-1516 or send us an email at sales@ventdepot.com.
RETURN POLICY
VentDepot, Inc. and VentDepot.com’s products on sale are of industrial and commercial nature, thus they are built to order. For All Built to Order products there is absolutely no returns or cancellations. These built to order products if tried to be returned will be subject to a 100% sale price stocking fee. It is important for our clients to know VentDepot, Inc. ships directly from factory warehouses and factories to the client by drop shipping. VentDepot, Inc. does not stock products in a warehouse of their own. If a client decides to cancel or return and order that can be accepted back by the factory then, they will have to pay 30% of the sale price of the product(s)’s value for restocking the product(s) with the original manufacturer; plus pay for all shipping charges both of return and of original purchase, and any other fees the factory may include for handling and is not limited to all of the above fees. These terms are non-negotiable.
Shipping Policy terms and agreements.
Please read the following information on how to receive Freight shipments when they arrive at your home.
Dear VentDepot Client. This letter is to inform you how to receive properly your products shipped by a Freight Company usually on pallets called LTL Freight shipment.
The following video is a you tube video that will explain how LTL shipping works, and how to avoid losses on damaged merchandise. Please also read the rest of this letter.
https://www.youtube.com/watch?v=VrRKbLXIGi0
The main purpose is for you to receive your products in New and Perfect condition within a Shipping Industry that due to over handling of heavy items may damage your product before you receive it.
To properly receive and allow claim protection for you and us, and the origin factory. You the client must inspect all items being received by opening all boxes and packages that may have a hidden dent or damage. The truck driver may try to pressure you into signing and accepting the merchandise as is, however by law they are required to wait for the client to inspect his or her products completely. So please do not let a driver pressure you into signing fast.
Once you inspect all items, you may write refuse on the paperwork to return at time of delivery any component that may seem damaged or unusable due to shipping wreckage. This refusal will allow us to replace or handle a claim to repair or return you a new product depending on the claim procedure.
It is your final responsibility to inspect all products in a LTL, Less than Truckload, Shipment. We will not be responsible for paying for any damaged goods and freight for products you did not inspect properly at time of delivery.
Thank you for protecting your investment and helping us deliver properly your new products.
Sincerely, VentDepot, Inc.
Claim disclosure letter. By receiving this letter via email you are liable for receiving your order at time of delivery, if not following these instructions.
Signed,
VentDepot Management Team
Your privacy is important to us. To better protect your privacy, we provide this notice explaining our online information practices and the choices you can make about the way your information is collected and used. This notice applies to all information collected or submitted on the www.VentDepot.com website.
• The only personal information we collect is name, street and email address, telephone number, credit card information.
• We use the personal information collected from you process orders. Such personal information as we collect is not used for any other purpose and is not shared.
• We never use or share the personally identifiable information provided to us online in ways unrelated to the ones described above.
• To prevent unauthorized access, maintain data accuracy, and ensure the correct use of information, we have put into place appropriate physical, electronic, and managerial procedures to safeguard and secure the information we collect online.
• Protecting the privacy of the very young is especially important. For that reason, we never collect or maintain information at our website from those we actually know are under the age of 13, and no part of our website is structured to attract anyone under 13 to provide information to us.
• You can correct factual errors in your personally identifiable information by sending us a request detailing the error(s). To protect your privacy and security, we will also take reasonable steps to verify your identity before granting access or making corrections.
• In the unlikely event any of the personal information you supply us online is misused, you may redress these issues by contacting us directly at sales@ventdepot.com or calling 1-888-514-1516.
Should you have questions or concerns about this Privacy Policy, please call us 1-888-514-1516 or send us an email at sales@ventdepot.com.
RETURN POLICY
VentDepot, Inc. and VentDepot.com’s products on sale are of industrial and commercial nature, thus they are built to order. For All Built to Order products there is absolutely no returns or cancellations. These built to order products if tried to be returned will be subject to a 100% sale price stocking fee. It is important for our clients to know VentDepot, Inc. ships directly from factory warehouses and factories to the client by drop shipping. VentDepot, Inc. does not stock products in a warehouse of their own. If a client decides to cancel or return and order that can be accepted back by the factory then, they will have to pay 30% of the sale price of the product(s)’s value for restocking the product(s) with the original manufacturer; plus pay for all shipping charges both of return and of original purchase, and any other fees the factory may include for handling and is not limited to all of the above fees. These terms are non-negotiable.
Shipping Policy terms and agreements.
Please read the following information on how to receive Freight shipments when they arrive at your home.
Dear VentDepot Client. This letter is to inform you how to receive properly your products shipped by a Freight Company usually on pallets called LTL Freight shipment.
The following video is a you tube video that will explain how LTL shipping works, and how to avoid losses on damaged merchandise. Please also read the rest of this letter.
https://www.youtube.com/watch?v=VrRKbLXIGi0
The main purpose is for you to receive your products in New and Perfect condition within a Shipping Industry that due to over handling of heavy items may damage your product before you receive it.
To properly receive and allow claim protection for you and us, and the origin factory. You the client must inspect all items being received by opening all boxes and packages that may have a hidden dent or damage. The truck driver may try to pressure you into signing and accepting the merchandise as is, however by law they are required to wait for the client to inspect his or her products completely. So please do not let a driver pressure you into signing fast.
Once you inspect all items, you may write refuse on the paperwork to return at time of delivery any component that may seem damaged or unusable due to shipping wreckage. This refusal will allow us to replace or handle a claim to repair or return you a new product depending on the claim procedure.
It is your final responsibility to inspect all products in a LTL, Less than Truckload, Shipment. We will not be responsible for paying for any damaged goods and freight for products you did not inspect properly at time of delivery.
Thank you for protecting your investment and helping us deliver properly your new products.
Sincerely, VentDepot, Inc.
Claim disclosure letter. By receiving this letter via email you are liable for receiving your order at time of delivery, if not following these instructions.
Signed,
VentDepot Management Team
We Ship Nation Wide
We handle your products with care.
We Protect Your Investment
All porducts warrantied.
Technical Support
sales@ventdepot.com
Call Us
Toll Free: 1 (888) 514-1516
Direct: +1 (626) 771-0048
Fax: +1 (626) 771-0047
Monday-Friday / 7:00AM-7:00PM Central
sales@ventdepot.com
Whats App 24/7
+1-626-208-6731
MOST SOLD ITEMS
.VIK Series ExhaustKit, Industrial Wall Exhaust Fan, USFEK-001-082
$764.03 USD
$1,123.57 USD
188 Series, Milk-House Portable Heater, USPOH-001-001
$89.43 USD
$131.52 USD
188 Series, TPI Milk-House Portable Heater, USPOH-001-001
$60.50 USD
$93.08 USD
2600 Series Downflow Unit Heater Roof Mounted and Bracket, Heater 2600 series heavy duty fan, USQWD-001-035
$1,171.40 USD
$1,722.65 USD
Also Purchased
3340 Series Heavy Duty Wall Heater Color White, Heater of the 3340 series, USSDY-001-052
United States/Heaters: Wall mount fully recessed, semi-recessed or surface mounted/3340 Series Heavy Duty Wall Heater Color White Spec Sheet (.pdf) Warranties 3340 Series Heavy Duty Wall Heater Color White Manufacturer's...
$3,075.61 USD
$2,091.41 USD
3340 Series Heavy Duty Wall Heater Color White with Semi Recess Frame, 3340 Series, USSDR-001-052
United States/Heaters: Wall mount fully recessed, semi-recessed or surface mounted/3340 Series Heavy Duty Wall Heater Color White with Semi Recess Frame Spec Sheet (.pdf) General Characteristics 3340 Series Heavy Duty...
$3,383.25 USD
$2,300.61 USD
3340 Series Heavy Duty Wall Heater Color White with Add HD Suffix 16, 3340 Series Mounted Fan, USSDP-001-052
United States/Heaters: Wall mount fully recessed, semi-recessed or surface mounted/3340 Series Heavy Duty Wall Heater Color White with Add HD Suffix 16 Spec Sheet (.pdf) General Characteristics 3340 Series Heavy...
$3,471.53 USD
$2,360.64 USD
3340 Series Heavy Duty Wall Heater Color Brown, Built-in heater, USRKO-001-052
United States/Heaters: Wall mount fully recessed, semi-recessed or surface mounted/3340 Series Heavy Duty Wall Heater Color Brown Spec Sheet (.pdf) General Characteristics 3340 Series Heavy Duty Wall Heater Color Brown...
$3,075.61 USD
$2,091.41 USD
3340 Series Heavy Duty Wall Heater Color Brown with Semi Recess Frame, 3340 Series Multiple Angle Cabinet, USHKO-001-052
United States/Heaters: Wall mount fully recessed, semi-recessed or surface mounted/3340 Series Heavy Duty Wall Heater Color Brown with Semi Recess Frame Spec Sheet (.pdf) General Characteristics 3340 Series Heavy Duty...
$3,383.25 USD
$2,300.61 USD
6300 Series Multiple Angle Cabinet Unit Heater and Accessories Kickbase -Pedestal- Only, Multiple Angle Cabinet Unit Heater, USACJ-001-009
United States/Heaters: Wall mount fully recessed, semi-recessed or surface mounted/6300 Series Multiple Angle Cabinet Unit Heater and Accessories Kickbase -Pedestal- Only Spec Sheet (.pdf) General Characteristics 6300 Series Multiple Angle...
$4,467.89 USD
$3,038.17 USD
6300 Series Multiple Angle Cabinet Unit Heater and Accessories Fresh Air Make-Up Intake, Series Multiple Angle Cabinet Unit, USACI-001-009
United States/Heaters: Wall mount fully recessed, semi-recessed or surface mounted/6300 Series Multiple Angle Cabinet Unit Heater and Accessories Fresh Air Make-Up Intake Spec Sheet (.pdf) General Characteristics 6300 Series Multiple...
$4,765.92 USD
$3,240.83 USD
6300 Series Multiple Angle Cabinet Unit Heater and Accessories Duct Collar, Series Multiple Angle Cabinet Unit, USACD-001-009
United States/Heaters: Wall mount fully recessed, semi-recessed or surface mounted/6300 Series Multiple Angle Cabinet Unit Heater and Accessories Duct Collar Spec Sheet (.pdf) General Characteristics 6300 Series Multiple Angle Cabinet...
$4,519.45 USD
$3,073.23 USD
